vt100

Home   Documentation   Impressum   Links

Cisco IOS Frame Relay Switch configuration

Disclaimer

This information is provided as is with no warranty. If you burn your kitchen sink don't blame me.

Introduction

This is a small howto set up a cisco ios router with serial interfaces as a frame relay switch

Prerequisites

Sample Network

Router	 	  Frame Relay Switch           Router
DLCI 100  ----    Serial0 :: Serial1   ----  DLCI 200

Cisco Config

boring things cutted out...

!
frame-relay switching
!
interface Serial1/0
 no ip address
 encapsulation frame-relay
 frame-relay intf-type dce
 frame-relay route 100 interface Serial1/1 200
!
interface Serial1/1
 no ip address
 encapsulation frame-relay
 frame-relay intf-type dce
 frame-relay route 200 interface Serial1/0 100
!

Links

These links were helpful:

http://www.cisco.com

Conclusions

This is a nice setup for frame relay labs...

Reminder

Handle your Cisco © gear with care.


Copyright © 2013 vt100.at. All rights reserved.

leitbruch